Our Blog

We are so glad that we will ship 50 sets casing head to USA at beginning of 2019.

Oil price is higher, and our business is also very busy.

casing head

LPS  is short name for Low Pressure Swivels.

Normally we focus on high pressure swivel joints which working pressure is higher than 5000 psi.

Recently, one of our friends hope us make low pressure swivel joints for them. and it is really hard to find someone to make it in suitable cost. We discuss with our technical department and successfully  finish the job. Low pressure swivels shape is very different from high pressure one. We will attach low pressure swivel joints photo and high pressure swivel joints as below.

LPS – Low pressure swivel joint

High Pressure Swivel joint

Recently we export 1000 sets of stamping cable protector to South America.

Why we say it sets, not pieces? As what we export including cross coupling cable protector and corresponding middle joint cable protector. Sometimes, end user like to use only cross coupling cable protector; sometimes, end user like to use both cross coupling and middle joint cable protector. There is one middle joint cable protector bettween two cross coupling cable protector.

Below is reffered photos.

Recently, we export some 3″ fig 1002 swivel joints , 6″ fig 206 union and other unions to Euro. Photos are as below:

Recently we get an order for stamping / punching cross coupling cable protector. Cable protector is our normal product. but we adopt a new coating process for it,  that’s why we mentioned here. Years ago, we prefer Phosphating treatment, and the color of protector will be black. and if we adopt Galvanizing treatment, the color will be yellow. Photos are as below.

there is one kind of positive choke type called OCT, which is often recognize as OTC. OTC is one huge exhibition in USA which is hold at end of April. Recently, we ship some OCT type choke to our customer.  Photos are as below.

With the rise of oil prices, the business of factories is getting better and better. and recently we got big order for frac gate valves, which is 7-1/16″ x 15000 psi. this valve belongs to ball screw gate valve. ball screw can effectively reduce stem torque. normally we make the gate valve with or with out flange. attached drawing is for studded end connection gate valve.

Normally, for equipment with fig union end connection, inlet is female side and outlet is male side.  but this time we will show you opposite one. There is one kind of reverse flapper check valve whose inlet is male side and outlet is female side. Below photo shows the one we sent to Euro.